Posted on Feb 04, 2012 under Digital Waterproof Camera |
Some cool Housing Case Nikon images:
Androne delle case ATC di via Scialoja, Torino
Image by Giampaolo Squarcina
Hall in a council house in via Scialoja, suburban Turin aka the Olympic City, Italy
burano – front side
Image by matteotarenghi
ordinate e originali nei loro colori, le case che affacciano sui canali di Burano, nascondono il loro "lato B" al passante occasionale
burano – rear side
Image by matteotarenghi
il "lato B" si svela girando un angolo, portati dalla curiosità
Housing Case Nikon auctions on eBay:|Housing Case Nikon eBay auctions you should keep an eye on:|Most popular Housing Case Nikon eBay auctions:|Housing Case Nikon on eBay:]
Waterproof Housing Case WP-X1 for Canon Nikon Sony DSLR SLR with Flashgun Type
Underwater Housing Case Nikon L2,L3,L4,L6,L11,L12,2500
underwater housing Waterproof case for Canon Nikon Sony Casio digital camera
SOFT WATERPROOF MARINE HOUSING CAMERA CASE FOR NIKON Coolpix P5000 P5100 P6000
Waterproof Camera Housing Case DC-WP20 for Canon Nikon
UNDERWATER WATERPROOF HOUSING CASE for NIKON D90 D5000
UNDERWATER WATERPROOF HOUSING CASE for NIKON D200 D300
UNDERWATER HOUSING CASE FOR NIKON COOLPIX L2 L3 L4 L6
uw underwater Housing digital Camera Waterproof case for diving for Nikon Sony
uw underwater Housing digital Camera Waterproof case for diving for Nikon Sony
WATERPROOF CAMERA HOUSING CASE FOR NIKON Coolpix S570 S610 S610C S620 S640 S3000
Underwater Housing Case for Nikon L16,L18 ,L22,L20,L19
Underwater Waterproof Housing Case for Nikon D3000,D40x
Nereus WP-X2 Camera Waterproof Housing Case For Canon Nikon Pentax Olympus Sony
Nereus DC-WP500 Waterproof Pouch Housing Case For Nikon S9100 Canon G5 G6 Sony
WATERPROOF HOUSING CASE FOR NIKON COOLPIX 7900 P1 P2 P4
WATERPROOF HOUSING CASE FOR NIKON COOLPIX P5000 P 5000
WATERPROOF HOUSING CASE FOR NIKON COOLPIX P5100 P 5100
NEREUS 20M WP-20 Waterproof Housing Case For Canon Nikon Sony Olympus Panasonic
Nereus DC-WP100 Waterproof Keep Dry Case Housing Pouch Bag for Nikon Canon Sony
WATERPROOF UNDERWATER HOUSING CASE for NIKON P100 L110
Underwater 20m Waterproof Camera Bag Housing Case DC-WP1 WP-1 for Sony Nikon
BINGO Camera Waterproof Case Housing for Canon Nikon
Nereus DC-WP500 Waterproof Housing Pouch Case for Nikon Canon Sony Pentax DSLR
BINGO Camera Waterproof Case Housing for Canon Nikon
Underwater housing case for Nikon Coolpix S51 S2 S3 S5
Waterproof Housing Case for Nikon Digital SLR D300 D200
Nereus Waterproof Camera Housing Case SLR DSLR Camera WP-X1 For Canon Nikon Sony
Nereus DSLR-WPX1 Waterproof Camera Housing Case For Canon Nikon Pentax SONY OM
SS-2 Waterproof Camera Case/Housing Nikon S50 S50C
SS-2 Waterproof Camera Case/Housing Nikon S51 S51C
SS-2 Waterproof Camera Case/Housing Nikon S60 S70
SS-2 Waterproof Camera Case/Housing Nikon S52 S52C
SS-2 Waterproof Camera Case/Housing Nikon S3 S5 NEW
SS-2 Waterproof Camera Case/Housing Nikon S1 S2 NEW
SS-2 Waterproof Camera Case/Housing Nikon S8 S9 NEW
SS-1 Waterproof Camera Case/Housing NIKON L14 L19 NEW
SS-1 Waterproof Camera Case/Housing NIKON L2 L20 NEW
SS-1 Waterproof Camera Case/Housing NIKON L22 L3 NEW
SS-1 Waterproof Camera Case/Housing NIKON S210 S220 NEW
SS-1 Waterproof Camera Case/Housing NIKON S560 S570 NEW
SS-1 Waterproof Camera Case/Housing NIKON S610 S620 NEW
SS-1 Waterproof Camera Case/Housing NIKON S700 S710 NEW
SS-1 Waterproof Camera Case/Housing NIKON S500 S510 NEW
SS-1 Waterproof Camera Case/Housing NIKON S520 S550 NEW
SS-1 Waterproof Camera Case/Housing NIKON L6 S200 NEW
SS-1 Waterproof Camera Case/Housing NIKON S630 S640 NEW
SS-2 Waterproof Camera Case/Housing Nikon S80 S1000pj N
SS-1 Waterproof Camera Case/Housing NIKON L10 L11 L12
SS-1 Waterproof Camera Case/Housing NIKON S230 S4000
SS-1 Waterproof Camera Case/Housing NIKON S600 S6000
Nereus Waterproof Camera Housing Case DC-WP600 For Canon G10 G11 G12 Nikon P6000
Posted on Jan 30, 2012 under Canon Waterproof Camera |
Some cool Cam Case Sony images:
Black Widow – 1
Image by christopherallisonphotography.com
The Original Black Widow restored by Richard Riddell
Built in 1952
“THE BLACK WIDOW” Builders: Wally Olson (1952), Bill Scott (1954) and Richard Riddell (2005) The garage find of the century! How long have you been hot rodding cars–since the 1950’s? Many of us got started in the 50’s and 60’s. (For you real old birds out there that remember hot rodding “T” roadsters with Roto-Faze ignitions, Ruxtell 2-speed rear axles, Riley 2-port heads and Laurel lowering kits, well what can we say you’re a generation before us and we take our hats off to you ‘original’ hot rodders.) BUT for all of us “The Black Widow” is a serious piece of 1950’s hot rodding annals and a benchmark for the industry! In an article in Hot Rod Deluxe, July 2008 entitled, “Tangled Web” the full-story of Richard Riddell’s quest to restore the original Black Widow had its public debut. Hot Rod Deluxe reported the car’s winning the 2008 Grand National Roadster Show which was a dream come true, taking “Best Early Altered T Roadster”. (See also Rod and Custom, June 2008.) It was also a contender for the Bruce Meyer award at the ‘Grand Nats.’ Why do guys like Richard Riddell (and the rest of us) spend years (3400 hours in Richard’s case) restoring a car we found in a barn? Answer: ‘For the love of the sport!’ All of us remember some other cars with similar names, for instance the ‘Black Widow’ Monogram model car (“1/24 scale model/Ford ‘T’ Pickup Rod/removable top” by Mattel quality hobby kits). Also, we remember General Motors/Chevrolet coming out in 1957 with their first racing version Chevy called “The Black Widow.” But predating both of these historic cars is the “The Black Widow” built by Wally Olson to help keep his kids out of trouble in 1952 and first débuted in Hot Rod magazine, September 1954 in an article entitled, “Lil’ Beau T”, which read, “Wally Olson, Fresno, California, automotive machinist, is the lucky owner and builder. Duane Taylor was called in for the body work.” It added as to why he built the car, “What with so much current upheaval in the teen-age ranks, Wally figured that a sure-fire way to eliminate those free-time, nothing-to-do troubles would be to interest them (his 9 and 12 year old sons) in a rod. So far the idea has worked like a charm.” In time the family moved on to other projects and Bill Scott purchased the car and redid it with fenders, headlights and all the stuff to make it ‘street legal’—as we used to call it! The first documentation of the car being called “Black Widow” is found in the magazine Rodding and Re-styling, August 1957 issue. That article reported Bill Scott’s changes to Wally Olson’s car, “The front end was revised to incorporate a tubular axle and tube shocks. The new owners also equipped the car with a new power plant. The original mill is a ’41 Merc bored out .100 inch over stock, ported and relieved…includes 8.5-to-1 Offenhauser heads, a Weber full-race cam, and an Evans 3-caberator manifold.” [Note: The several engines that were housed in this car later varied; see final Merc build details below.] Don’t you love the sound of that “ported and relieved” and “full-race cam”—when’s the last time you used those terms? By the time the 1959 Hot Rod Annual was published the car-title stuck for all time “The Black Widow.” Riddell’s 2-Year Renovation! According to long time race car builder Richard Riddell’s log he states, “Sometime in 1955 Wally sold his roadster to Bill Scott. Bill again called on Duane Taylor to turn the car into a bonified street rod. With the additional of windshield, head lights, tail lings, and fenders it was finally able to jump into his little Hot Rod and go crusin’. The pin stripping was done by none other than Dean Jefferies with the familiar cobweb and spider on the turtle deck.” He reports that the car’s first win was “…a five foot trophy at the Sacramento AutoRama in 1957 for ‘Best Roadster’. Yes, Bill’s car was having the time of its life being one of the best looking early California street roadsters of all time.” Richard states, “Bill Scott died around 1987…for several years the car languished…getting worse and worse…as is so often the case for old Hot Rods.” The garage find in 2005 notes, “At a glance the roadster didn’t look that bad.” But the Naugahyde and carpet were shot, fenders, original wheels and hub caps to name a few problems for the yet to begin restoration. Riddell notes, “Under a somewhat decent body and paint job lurked a mess that went beyond your worst nightmare.” He adds, “I began wondering how I could salvage this little beauty in the rough. Not that many people have restored an old Hot Rod but, those who have know what I’m talking about. It’s much harder than building a rod from scratch. But the roadster was begging to be restored and I’m glad that I was chosen to do it.”and#9472;Richard died shortly after finishing the project but happily he was able to see “The Black Widow” win the ‘Grand Nats’ and have a feature center-spread article in Hot Rod Deluxe. Here are a few of the Riddell-engineered refinements to this original car. and#61692; Recessed pockets had to be built in the frame rails to accept the front motor mounts which double as water pumps. and#61692; New front radius rods were built out of heavy wall chrome-moly tubing. The original ones were so poorly made that they were unsafe. and#61692; The correct master cylinder banjo fitting was not available so, he fabricated a new one from scratch. and#61692; The tooling mandral had to be CNC machined to facilitate metal spinning new brass tail pipe end bells. Hey would you agree? Hot rodding is an art form and some Hot Rod Artists have mastered the craft and Richard Riddell is one of them!!! Reconstruction points of interest: and#61656; Original steel body and doors welded shut and#61656; ‘42 Merc 274 c.i flathead (current engine) and#61656; ’39 Lincoln-Zephyr tranny and#61656; ’34 Ford rear with Halibrand quick-change center and enclosed drive shaft and#61656; ’39 Ford hydraulic brakes all around and wide “5” 16-iunch wheels and caps and#61656; ’37 Ford tube axle and#61656; Engine by RPM Machine and#61656; Chrome by Ace Plating and#61656; Frame done by Capps Powder Coat and#61656; Body/paint by Showtime Customs and#61656; Upholstery by Brents Why is the car being sold? To quote his wife Pat, “Unfortunately, Richard passed away on March 18, 2008 and will not get to enjoy seeing the new owner drive away with a piece of automotive history.” Richard’s loyal wife Pat grew up around racing since she was 9 years old. Her maiden name was Rodriguez. If you grew up at Lion’s Dragstrip, as she did, you may remember her father’s rail? He and his brother ran an old top alky rail under the name “Rodriguez Brothers”. Pat said, ‘As I was growing up I often wondered how I would ever meet someone to marry, since all that our family ever did was go to the drags. Then one day Richard came along and met me at the Winternationals.’ Well the rest is history. For Pat after Richard’s death there are just too many memories attached to all the memorabilia, race cars and hot rods in their storage—she would like to sell “The Black Widow” to some deserving hot rodder. Terms of sale: 5,000.00. Please contact Don Burdge at DreamRodLocator or call him at 619.804.8033. You should call me before Leno does! We have hundreds of additional photos and several 50’s and current magazine articles available to seriously interested buyers.
Black Widow – 1
Image by christopherallisonphotography.com
The Original Black Widow restored by Richard Riddell
Built in 1952
“THE BLACK WIDOW” Builders: Wally Olson (1952), Bill Scott (1954) and Richard Riddell (2005) The garage find of the century! How long have you been hot rodding cars–since the 1950’s? Many of us got started in the 50’s and 60’s. (For you real old birds out there that remember hot rodding “T” roadsters with Roto-Faze ignitions, Ruxtell 2-speed rear axles, Riley 2-port heads and Laurel lowering kits, well what can we say you’re a generation before us and we take our hats off to you ‘original’ hot rodders.) BUT for all of us “The Black Widow” is a serious piece of 1950’s hot rodding annals and a benchmark for the industry! In an article in Hot Rod Deluxe, July 2008 entitled, “Tangled Web” the full-story of Richard Riddell’s quest to restore the original Black Widow had its public debut. Hot Rod Deluxe reported the car’s winning the 2008 Grand National Roadster Show which was a dream come true, taking “Best Early Altered T Roadster”. (See also Rod and Custom, June 2008.) It was also a contender for the Bruce Meyer award at the ‘Grand Nats.’ Why do guys like Richard Riddell (and the rest of us) spend years (3400 hours in Richard’s case) restoring a car we found in a barn? Answer: ‘For the love of the sport!’ All of us remember some other cars with similar names, for instance the ‘Black Widow’ Monogram model car (“1/24 scale model/Ford ‘T’ Pickup Rod/removable top” by Mattel quality hobby kits). Also, we remember General Motors/Chevrolet coming out in 1957 with their first racing version Chevy called “The Black Widow.” But predating both of these historic cars is the “The Black Widow” built by Wally Olson to help keep his kids out of trouble in 1952 and first débuted in Hot Rod magazine, September 1954 in an article entitled, “Lil’ Beau T”, which read, “Wally Olson, Fresno, California, automotive machinist, is the lucky owner and builder. Duane Taylor was called in for the body work.” It added as to why he built the car, “What with so much current upheaval in the teen-age ranks, Wally figured that a sure-fire way to eliminate those free-time, nothing-to-do troubles would be to interest them (his 9 and 12 year old sons) in a rod. So far the idea has worked like a charm.” In time the family moved on to other projects and Bill Scott purchased the car and redid it with fenders, headlights and all the stuff to make it ‘street legal’—as we used to call it! The first documentation of the car being called “Black Widow” is found in the magazine Rodding and Re-styling, August 1957 issue. That article reported Bill Scott’s changes to Wally Olson’s car, “The front end was revised to incorporate a tubular axle and tube shocks. The new owners also equipped the car with a new power plant. The original mill is a ’41 Merc bored out .100 inch over stock, ported and relieved…includes 8.5-to-1 Offenhauser heads, a Weber full-race cam, and an Evans 3-caberator manifold.” [Note: The several engines that were housed in this car later varied; see final Merc build details below.] Don’t you love the sound of that “ported and relieved” and “full-race cam”—when’s the last time you used those terms? By the time the 1959 Hot Rod Annual was published the car-title stuck for all time “The Black Widow.” Riddell’s 2-Year Renovation! According to long time race car builder Richard Riddell’s log he states, “Sometime in 1955 Wally sold his roadster to Bill Scott. Bill again called on Duane Taylor to turn the car into a bonified street rod. With the additional of windshield, head lights, tail lings, and fenders it was finally able to jump into his little Hot Rod and go crusin’. The pin stripping was done by none other than Dean Jefferies with the familiar cobweb and spider on the turtle deck.” He reports that the car’s first win was “…a five foot trophy at the Sacramento AutoRama in 1957 for ‘Best Roadster’. Yes, Bill’s car was having the time of its life being one of the best looking early California street roadsters of all time.” Richard states, “Bill Scott died around 1987…for several years the car languished…getting worse and worse…as is so often the case for old Hot Rods.” The garage find in 2005 notes, “At a glance the roadster didn’t look that bad.” But the Naugahyde and carpet were shot, fenders, original wheels and hub caps to name a few problems for the yet to begin restoration. Riddell notes, “Under a somewhat decent body and paint job lurked a mess that went beyond your worst nightmare.” He adds, “I began wondering how I could salvage this little beauty in the rough. Not that many people have restored an old Hot Rod but, those who have know what I’m talking about. It’s much harder than building a rod from scratch. But the roadster was begging to be restored and I’m glad that I was chosen to do it.”and#9472;Richard died shortly after finishing the project but happily he was able to see “The Black Widow” win the ‘Grand Nats’ and have a feature center-spread article in Hot Rod Deluxe. Here are a few of the Riddell-engineered refinements to this original car. and#61692; Recessed pockets had to be built in the frame rails to accept the front motor mounts which double as water pumps. and#61692; New front radius rods were built out of heavy wall chrome-moly tubing. The original ones were so poorly made that they were unsafe. and#61692; The correct master cylinder banjo fitting was not available so, he fabricated a new one from scratch. and#61692; The tooling mandral had to be CNC machined to facilitate metal spinning new brass tail pipe end bells. Hey would you agree? Hot rodding is an art form and some Hot Rod Artists have mastered the craft and Richard Riddell is one of them!!! Reconstruction points of interest: and#61656; Original steel body and doors welded shut and#61656; ‘42 Merc 274 c.i flathead (current engine) and#61656; ’39 Lincoln-Zephyr tranny and#61656; ’34 Ford rear with Halibrand quick-change center and enclosed drive shaft and#61656; ’39 Ford hydraulic brakes all around and wide “5” 16-iunch wheels and caps and#61656; ’37 Ford tube axle and#61656; Engine by RPM Machine and#61656; Chrome by Ace Plating and#61656; Frame done by Capps Powder Coat and#61656; Body/paint by Showtime Customs and#61656; Upholstery by Brents Why is the car being sold? To quote his wife Pat, “Unfortunately, Richard passed away on March 18, 2008 and will not get to enjoy seeing the new owner drive away with a piece of automotive history.” Richard’s loyal wife Pat grew up around racing since she was 9 years old. Her maiden name was Rodriguez. If you grew up at Lion’s Dragstrip, as she did, you may remember her father’s rail? He and his brother ran an old top alky rail under the name “Rodriguez Brothers”. Pat said, ‘As I was growing up I often wondered how I would ever meet someone to marry, since all that our family ever did was go to the drags. Then one day Richard came along and met me at the Winternationals.’ Well the rest is history. For Pat after Richard’s death there are just too many memories attached to all the memorabilia, race cars and hot rods in their storage—she would like to sell “The Black Widow” to some deserving hot rodder. Terms of sale: 5,000.00. Please contact Don Burdge at DreamRodLocator or call him at 619.804.8033. You should call me before Leno does! We have hundreds of additional photos and several 50’s and current magazine articles available to seriously interested buyers.
Black Widow – 1
Image by christopherallisonphotography.com
The Original Black Widow restored by Richard Riddell
Built in 1952
“THE BLACK WIDOW” Builders: Wally Olson (1952), Bill Scott (1954) and Richard Riddell (2005) The garage find of the century! How long have you been hot rodding cars–since the 1950’s? Many of us got started in the 50’s and 60’s. (For you real old birds out there that remember hot rodding “T” roadsters with Roto-Faze ignitions, Ruxtell 2-speed rear axles, Riley 2-port heads and Laurel lowering kits, well what can we say you’re a generation before us and we take our hats off to you ‘original’ hot rodders.) BUT for all of us “The Black Widow” is a serious piece of 1950’s hot rodding annals and a benchmark for the industry! In an article in Hot Rod Deluxe, July 2008 entitled, “Tangled Web” the full-story of Richard Riddell’s quest to restore the original Black Widow had its public debut. Hot Rod Deluxe reported the car’s winning the 2008 Grand National Roadster Show which was a dream come true, taking “Best Early Altered T Roadster”. (See also Rod and Custom, June 2008.) It was also a contender for the Bruce Meyer award at the ‘Grand Nats.’ Why do guys like Richard Riddell (and the rest of us) spend years (3400 hours in Richard’s case) restoring a car we found in a barn? Answer: ‘For the love of the sport!’ All of us remember some other cars with similar names, for instance the ‘Black Widow’ Monogram model car (“1/24 scale model/Ford ‘T’ Pickup Rod/removable top” by Mattel quality hobby kits). Also, we remember General Motors/Chevrolet coming out in 1957 with their first racing version Chevy called “The Black Widow.” But predating both of these historic cars is the “The Black Widow” built by Wally Olson to help keep his kids out of trouble in 1952 and first débuted in Hot Rod magazine, September 1954 in an article entitled, “Lil’ Beau T”, which read, “Wally Olson, Fresno, California, automotive machinist, is the lucky owner and builder. Duane Taylor was called in for the body work.” It added as to why he built the car, “What with so much current upheaval in the teen-age ranks, Wally figured that a sure-fire way to eliminate those free-time, nothing-to-do troubles would be to interest them (his 9 and 12 year old sons) in a rod. So far the idea has worked like a charm.” In time the family moved on to other projects and Bill Scott purchased the car and redid it with fenders, headlights and all the stuff to make it ‘street legal’—as we used to call it! The first documentation of the car being called “Black Widow” is found in the magazine Rodding and Re-styling, August 1957 issue. That article reported Bill Scott’s changes to Wally Olson’s car, “The front end was revised to incorporate a tubular axle and tube shocks. The new owners also equipped the car with a new power plant. The original mill is a ’41 Merc bored out .100 inch over stock, ported and relieved…includes 8.5-to-1 Offenhauser heads, a Weber full-race cam, and an Evans 3-caberator manifold.” [Note: The several engines that were housed in this car later varied; see final Merc build details below.] Don’t you love the sound of that “ported and relieved” and “full-race cam”—when’s the last time you used those terms? By the time the 1959 Hot Rod Annual was published the car-title stuck for all time “The Black Widow.” Riddell’s 2-Year Renovation! According to long time race car builder Richard Riddell’s log he states, “Sometime in 1955 Wally sold his roadster to Bill Scott. Bill again called on Duane Taylor to turn the car into a bonified street rod. With the additional of windshield, head lights, tail lings, and fenders it was finally able to jump into his little Hot Rod and go crusin’. The pin stripping was done by none other than Dean Jefferies with the familiar cobweb and spider on the turtle deck.” He reports that the car’s first win was “…a five foot trophy at the Sacramento AutoRama in 1957 for ‘Best Roadster’. Yes, Bill’s car was having the time of its life being one of the best looking early California street roadsters of all time.” Richard states, “Bill Scott died around 1987…for several years the car languished…getting worse and worse…as is so often the case for old Hot Rods.” The garage find in 2005 notes, “At a glance the roadster didn’t look that bad.” But the Naugahyde and carpet were shot, fenders, original wheels and hub caps to name a few problems for the yet to begin restoration. Riddell notes, “Under a somewhat decent body and paint job lurked a mess that went beyond your worst nightmare.” He adds, “I began wondering how I could salvage this little beauty in the rough. Not that many people have restored an old Hot Rod but, those who have know what I’m talking about. It’s much harder than building a rod from scratch. But the roadster was begging to be restored and I’m glad that I was chosen to do it.”and#9472;Richard died shortly after finishing the project but happily he was able to see “The Black Widow” win the ‘Grand Nats’ and have a feature center-spread article in Hot Rod Deluxe. Here are a few of the Riddell-engineered refinements to this original car. and#61692; Recessed pockets had to be built in the frame rails to accept the front motor mounts which double as water pumps. and#61692; New front radius rods were built out of heavy wall chrome-moly tubing. The original ones were so poorly made that they were unsafe. and#61692; The correct master cylinder banjo fitting was not available so, he fabricated a new one from scratch. and#61692; The tooling mandral had to be CNC machined to facilitate metal spinning new brass tail pipe end bells. Hey would you agree? Hot rodding is an art form and some Hot Rod Artists have mastered the craft and Richard Riddell is one of them!!! Reconstruction points of interest: and#61656; Original steel body and doors welded shut and#61656; ‘42 Merc 274 c.i flathead (current engine) and#61656; ’39 Lincoln-Zephyr tranny and#61656; ’34 Ford rear with Halibrand quick-change center and enclosed drive shaft and#61656; ’39 Ford hydraulic brakes all around and wide “5” 16-iunch wheels and caps and#61656; ’37 Ford tube axle and#61656; Engine by RPM Machine and#61656; Chrome by Ace Plating and#61656; Frame done by Capps Powder Coat and#61656; Body/paint by Showtime Customs and#61656; Upholstery by Brents Why is the car being sold? To quote his wife Pat, “Unfortunately, Richard passed away on March 18, 2008 and will not get to enjoy seeing the new owner drive away with a piece of automotive history.” Richard’s loyal wife Pat grew up around racing since she was 9 years old. Her maiden name was Rodriguez. If you grew up at Lion’s Dragstrip, as she did, you may remember her father’s rail? He and his brother ran an old top alky rail under the name “Rodriguez Brothers”. Pat said, ‘As I was growing up I often wondered how I would ever meet someone to marry, since all that our family ever did was go to the drags. Then one day Richard came along and met me at the Winternationals.’ Well the rest is history. For Pat after Richard’s death there are just too many memories attached to all the memorabilia, race cars and hot rods in their storage—she would like to sell “The Black Widow” to some deserving hot rodder. Terms of sale: 5,000.00. Please contact Don Burdge at DreamRodLocator or call him at 619.804.8033. You should call me before Leno does! We have hundreds of additional photos and several 50’s and current magazine articles available to seriously interested buyers.
what’s in my bag
Image by яaїи
Cam Case Sony auctions on eBay:|Cam Case Sony eBay auctions you should keep an eye on:|Most popular Cam Case Sony eBay auctions:|Cam Case Sony on eBay:]
SONY HANDY CAM LCM-DVDY SEMI SOFT CARRYING CASE
Sony Handy-Cam Video 8 Camera In Soft Carry Case Accessories CCD TRV-11 No Work
Sony DXC-M2 Studio Cam with case and accessories-for parts-working ?
Camera Case compatible with SONY Cybershot digital cam pocket small black
Camera Case compatible with SONY Cybershot digital cam pocket small black
Black Leather cam Case Bag for Sony Alpha NEX5 NEX-5 E
New Camera Case - Black Pouch digital cam bag for sony nikon canon fuji travel
SONY LCSVCC camcorder/dig cam soft carring case NEW
SONY LCSVCC camcorder/dig cam soft carring case NEW
SONY LCSVCC camcorder/dig cam soft carring case NEW
CAM070 Protector Camera Lens Pouch Case Bag for Canon Nikon Sony PK 80mm～100mm 6
CAM110 Protector Camera Lens Pouch Case Bag Mamiya 645 Canon Nikon Sony 100mm-16
CAM110 Protector Camera Lens Pouch Case Bag Mamiya 645 Canon Nikon Sony 100mm-16
Soft Neoprene Case for Sony MHS-PM5 Bloggie Video Cam
CAM110 Protector Camera Lens Pouch Case Bag Mamiya 645 Canon Nikon Sony 100mm-16
Camera case ribbed neoprene digital cam pocket blue new Sony compatible
Multi Pouch Sony Samung Handy Cam Camcorder Case Bag
Camera Case Bag for Sony DSC-H20 H10 Cam Black + Strap
NEW Sony Dark Blue Handy Cam Case - LCS-BBD
New Camera Case - (Red/Black) Pouch digital cam bag for sony nikon canon fuji
New Camera Case - (Grey/Black) Pouch digital cam bag for sony nikon canon fuji
Camera Case compatible with SONY Cybershot digital cam pocket small black
New Camera Case - Purple Flower Pouch digital cam bag for sony nikon canon fuji
New Camera Case - Pink Leather Pouch digital cam bag for sony nikon canon fuji
SONY LCSVCC camcorder/dig cam soft carring case NEW
CAM070 Protector Camera Lens Pouch Case Bag for Canon Nikon Sony PK 80mm~100mm 6
CAM110 Protector Camera Lens Pouch Case Bag Mamiya 645 Canon Nikon Sony 100mm-16
New Neoprene Camera Lens Case Cam Cover Sony Cybershot Nikon Coolpix Canon Soft
New Camera Case - Pu Hot Pink Ring Cam Cover For Sony Cybershot Nikon Coolpix
New Pu Wrap Black Cam Case Digital Camera Cover Sony Cybershot Nikon Coolpix
Find More Cam Case Sony Products
